Slide - iFixit Repair Guide

What you need

Step 1 Preparation

Slide, Preparation: step 1, image 1 of 1

Keep in mind that there are many screws of varying length involved in the disassembly of this gun. It is important to group screws together by length to ensure proper reassembly.
Be sure that the device has been discharged and is unloaded before beginning the disassembly.

Step 2 Remove

Slide, Remove: step 2, image 1 of 2

Slide, Remove: step 2, image 2 of 2

Point the barrel of the device to the left. Remove the two 8mm philips head screws (the two top screws) holding the device slide together.
Keep the barrel of the gun pointing to the left. Remove the three 10 mm philips head screws from the bottom of the device slide.

Step 3 Separate the halves

Slide, Separate the halves: step 3, image 1 of 1

Once all the screws are removed, separate the two halves of the device slide and put them aside.
Be sure to keep track of which screws correspond to the correct holes.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Special thanks to these translators:

es en

100%

Agente A-01

Agente A-01 is helping us fix the world! Want to contribute?
Start translating ›

Author

with 1 other contributor

Agente A-01

Member since: 08/19/19

265 Reputation

1 Guide authored

Team

Hasbro Nerf Member of Hasbro Nerf

Community

1 Member

2 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 2

All Time: 89