Introduction

This repair guide will walk through the primary steps of replacing the antenna in Skytex SP728.

Make sure the device is powered off
  • Make sure the device is powered off

  • Rotate the device so the ports and screws face you

Add Comment

Using a small phillips screwdriver, unscrew both end screws
  • Using a small phillips screwdriver, unscrew both end screws

Add Comment

Using a plastic opening tool, work your way around the edge of the device, separating the case from the rest of the device
  • Using a plastic opening tool, work your way around the edge of the device, separating the case from the rest of the device

Add Comment

Deck the Halls
With tools and Fix Kits
Once the case has been loosened, pry the backing off gently with your hands.
  • Once the case has been loosened, pry the backing off gently with your hands.

  • Make sure to remove the case gently as extra force can break the clasps or the case itself.

Add Comment

Remove the case and open the device
  • Remove the case and open the device

Add Comment

Remove the black tapes
  • Remove the black tapes

Add Comment

Use the soldering station and remove soldered connections to the antenna wires.
  • Use the soldering station and remove soldered connections to the antenna wires.

  • Now replace the antenna.

  • Follow the link below for additional soldering information "https://www.ifixit.com/Guide/How+To+Sold...

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Galika Adhikari

Member since: 01/21/2015

240 Reputation

2 Guides authored

Team

USF Tampa, Team 5-1, Brown Winter 2015 Member of USF Tampa, Team 5-1, Brown Winter 2015

USFT-BROWN-W15S5G1

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 67