Skip to main content

What you need

  1. SkullCandy Hesh Size Adjuster Replacement, Determine the damage: step 1, image 1 of 2 SkullCandy Hesh Size Adjuster Replacement, Determine the damage: step 1, image 2 of 2
    • Locate the break in the device.

  2. SkullCandy Hesh Size Adjuster Replacement: step 2, image 1 of 1
    • Use a Phillips #0 screwdriver to remove the two 9 mm screws from the bottom inner casing beneath the break.

  3. SkullCandy Hesh Size Adjuster Replacement: step 3, image 1 of 1
    • Remove the bottom inner casing to reveal the wire compartment and the port where the slider inserts.

  4. SkullCandy Hesh Size Adjuster Replacement: step 4, image 1 of 2 SkullCandy Hesh Size Adjuster Replacement: step 4, image 2 of 2
    • Cover the detached slider port in a generous layer of Plasti Dip, which works like glue. Also coat any exposed wire to seal the circuit.

  5. SkullCandy Hesh Size Adjuster Replacement: step 5, image 1 of 1
    • Realign the broken size adjuster into the port with the Plasti Dip so that it can be secured to the ear piece.

  6. SkullCandy Hesh Size Adjuster Replacement: step 6, image 1 of 1
    • Clamp the pieces in place by hand or with a binder clip until the Plasti Dip dries. Feel free to use a hair dryer on a low setting to speed up the process.

Conclusion

To reassemble your device, reattach the bottom inner casing with the Phillips #0 screwdriver and two removed screws.

Sarah Burk

Member since: 01/15/2015

247 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 36

All Time: 572