Skip to main content

Introduction

The casing of the device can sometimes crack. This guide will show you how to take apart the device and replace the casing.

  1. Take the iFixit opening tool and place it between the back casing and the device as shown.
    • Take the iFixit opening tool and place it between the back casing and the device as shown.

  2. Apply pressure to the iFixit opening tool, pushing down until the the plastic casing pops off. Apply pressure to the iFixit opening tool, pushing down until the the plastic casing pops off.
    • Apply pressure to the iFixit opening tool, pushing down until the the plastic casing pops off.

  3. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  4. Use the Phillips PH00 screwdriver to remove the three marked screws. Use the Phillips PH00 screwdriver to remove the three marked screws.
    • Use the Phillips PH00 screwdriver to remove the three marked screws.

  5. Remove the buttons from the casing. Remove the buttons from the casing. Remove the buttons from the casing.
    • Remove the buttons from the casing.

  6. Remove the motherboard, and the casing should be free. Remove the motherboard, and the casing should be free.
    • Remove the motherboard, and the casing should be free.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Christina Tao

Member since: 10/17/2017

319 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 107