Introduction

The collar is the place the top and bottom of the microphone screw together. After unscrewing it, you will have access to most of the internal parts of the microphone.

Grab the microphone base with one hand. With the other hand, grab just below the grille (the collar). Twist the collar clockwise to loosen it. Be careful to not pull on the collar or you may rip the wires from the faceplate. Be careful to not pull on the collar or you may rip the wires from the faceplate.
  • Grab the microphone base with one hand. With the other hand, grab just below the grille (the collar). Twist the collar clockwise to loosen it.

  • Be careful to not pull on the collar or you may rip the wires from the faceplate.

Add Comment

Deck the Halls
With tools and Fix Kits
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

nat coll

Member since: 09/27/2012

324 Reputation

15 Guides authored

Team

Cal Poly, Team 7-53, Forte Fall 2012 Member of Cal Poly, Team 7-53, Forte Fall 2012

CPSU-FORTE-F12S7G53

5 Members

16 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 20

Past 30 Days: 88

All Time: 6,470