Introduction

The user will learn how to:

  • Remove the device from the case
  • Locate the on/off button
  • Remove the back panel where the on/off button is located

Parts

No parts required.

  1. Position the device on/off button side up.
    • Position the device on/off button side up.

  2. The back panel will come off easily, do not apply too much pressure.
    • The back panel will come off easily, do not apply too much pressure.

    • Use the plastic opening tool to pry open the back panel of the device.

    • To replace the on/off button, you must replace the entire back panel. The on/off button cannot be removed from the panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 113