Skip to main content

Introduction

When a dirty filter causes the vacuum suction to greatly decrease, you might want to think about replacing it.

  1. Lift up the red unlatch button located on the back end of the dust cup. Lift up the red unlatch button located on the back end of the dust cup.
    • Lift up the red unlatch button located on the back end of the dust cup.

  2. While pulling the red latch button, pull the dust cup away from the vacuum to remove it. While pulling the red latch button, pull the dust cup away from the vacuum to remove it. While pulling the red latch button, pull the dust cup away from the vacuum to remove it.
    • While pulling the red latch button, pull the dust cup away from the vacuum to remove it.

  3. Lift the filter upwards. To clean the filter, rinse the filter with water and allow it to dry before placing it back into the vacuum. To clean the filter, rinse the filter with water and allow it to dry before placing it back into the vacuum.
    • Lift the filter upwards.

    • To clean the filter, rinse the filter with water and allow it to dry before placing it back into the vacuum.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joshua Morrison

Member since: 01/24/2019

196 Reputation

2 Guides authored

Team

Cal Poly, Team S19-G3, White Winter 2019 Member of Cal Poly, Team S19-G3, White Winter 2019

CPSU-WHITE-W19S19G3

5 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 173