Introduction

This guide will tell you step by step how to replace a malfunctioning Roller in a Shark Rocket HV381 Vaccum.

On the right-bottom of the body, pull down the black switch. You will hear an audible click when you detach the body from the vacuum head. On the right-bottom of the body, pull down the black switch. You will hear an audible click when you detach the body from the vacuum head.
  • On the right-bottom of the body, pull down the black switch. You will hear an audible click when you detach the body from the vacuum head.

Add Comment

Laying  the vacuum head on the its right side, push the orange "Eject Roller" switch down.  The Roller can now be removed with ease.
  • Laying the vacuum head on the its right side, push the orange "Eject Roller" switch down. The Roller can now be removed with ease.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dandre Porter

Member since: 08/22/2017

501 Reputation

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 12

All Time: 91