Introduction

This guide will tell you step by step how to replace a malfunctioning Brush. on the Shark Rocket HV381.

On the top of the vacuum head is two grey "Brush Roller Access" buttons. Simultaneously press both buttons to eject the Roller Cover. Remove the Roller Cover by pulling it towards you and up.
  • On the top of the vacuum head is two grey "Brush Roller Access" buttons. Simultaneously press both buttons to eject the Roller Cover. Remove the Roller Cover by pulling it towards you and up.

Add Comment

The "Pull Tab" tab is located at the right. Pull the Tab up  and to the right for removal.
  • The "Pull Tab" tab is located at the right. Pull the Tab up and to the right for removal.

  • The Brush is sticky so hold the vacuum head with one hand and give the tab a moderate tug.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dandre Porter

Member since: 08/22/2017

501 Reputation

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 85