Fix Your Stuff Community Store

Shark IQ AV993 Roller Brush Replacement

Introduction

This is the replacement guide for the Shark IQ AV993 roller brush. This replacement is very simple and easy to complete, there are no required previous knowledge of the device needed to complete this guide. There are no hazards to be on the lookout for. Just be very gentle and carful when taking out parts and moving things around. This replacement might be needed if your roller brush is clogged or worn down to the point where it is no use.

  1. Shark IQ AV993 Roller Brush Replacement, Roller Brush: step 1, image 1 of 1

    • Remove the dust bin from the device by pressing down on the release button and pulling out the tray.

    Edit

  3. Shark IQ AV993 Roller Brush Replacement: step 2, image 1 of 1

    • Turn the device over so the bottom is facing upwards.

    • Press on the release tabs located on the roller brush cover.

    • Remove the cover from the device.

    Edit

  4. Shark IQ AV993 Roller Brush Replacement: step 3, image 1 of 1

    • Use your hands to lift the roller brush out of the device.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Cole Travers

Member since: 10/26/22

150 Reputation

1 Guide authored

Badges: 4

+1 more badge

Team

UMass Dartmouth, Team 3-3, Botvin Fall 2022 Member of UMass Dartmouth, Team 3-3, Botvin Fall 2022

UMASSD-BOTVIN-F22S3G3

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 138