Shark ION RV754 Filter Replacement
James Holland and
Last updated on Jun 19, 2025
Views: 569
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 17
- Past 30 Days:
- 62
- All Time:
- 569
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide demonstrates how to replace the two dust filters for the Shark RV754. The filters are responsible for catching fine dust particles that would otherwise float into the air as the vacuum operates. The filters may become clogged over time with regular use. Dirty or overused filters restrict airflow, reducing suction power and the capability to pick up debris. Filters can be cleaned manually to improve effectiveness; however, if they are damaged, they may need to be replaced with new filters.
The vacuum comes with only 1 set of filters, so extras will need to be purchased from Shark's website or third-party retailers like Amazon.
Before you begin, make sure that the device is powered off and disconnected from the charging dock.
What you need
Tools
-
-
-
Flip the robot vacuum upside down so the wheels are facing up.
-
Press the dust bin removal latch and slide out the dust bin.
Ask FixBot
-
-
-
-
To access the second filter, open the debris tray.
-
Hold the tray with two fingers at the indicated holes, and use your other hand to pull from the opposite side of the tray.
-
-
-
Use a Phillips #0 screwdriver to remove the 7.3 mm screw securing the second filter.
-
Lift the filter out from the same side where you removed the screw.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Tennessee Tech University, Team 1-1, Pickering Spring 2025 Member of Tennessee Tech University, Team 1-1, Pickering Spring 2025
TNTECH-PICKERING-S25S1G1
4 Members
84 Guides authored
