Skip to main content

Introduction

You will need to remove the top component to access the motor and motherboard.

Parts

No parts specified.

  1. Remove the four 15 mm T10 screws on the underside of the vacuum.
    • Remove the four 15 mm T10 screws on the underside of the vacuum.

  2. Using the plastic spudger, pry the back seam of the top component to pop it off the vacuum. Using the plastic spudger, pry the back seam of the top component to pop it off the vacuum.
    • Using the plastic spudger, pry the back seam of the top component to pop it off the vacuum.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Samantha Mickelson

Member since: 10/08/2018

478 Reputation

4 Guides authored

Team

Cal Poly, Team S17-G5, White Fall 2018 Member of Cal Poly, Team S17-G5, White Fall 2018

CPSU-WHITE-F18S17G5

4 Members

14 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 8

Past 30 Days: 28

All Time: 953