Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

Following this guide requires cutting wires and soldering. For more information on soldering visit the soldering guide.

  1. Squeeze Dust Cup release buttons on either side of the component. Pull up to release Dust Cup.
    • Squeeze Dust Cup release buttons on either side of the component.

    • Pull up to release Dust Cup.

  2. Remove the five 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.
    • Remove the five 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

  3. Use the iFixit opening tool to remove the top component.
    • Use the iFixit opening tool to remove the top component.

  4. Remove the two 15mm screws by twisting counterclockwise using the T10 Torx screwdriver.
    • Remove the two 15mm screws by twisting counterclockwise using the T10 Torx screwdriver.

  5. Remove the two 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.
    • Remove the two 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

  6. Remove the two 15 mm screws holding the motor cover by twisting counterclockwise with a T10 Torx screwdriver.
    • Remove the two 15 mm screws holding the motor cover by twisting counterclockwise with a T10 Torx screwdriver.

  7. Cut the zip ties holding the motor using the wire cutter.
    • Cut the zip ties holding the motor using the wire cutter.

  8. Cut the wires using the wire cutters to completely remove the motor.
    • Cut the wires using the wire cutters to completely remove the motor.

    • For reassembly, use the soldering guide in the Introduction.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Christian Fuller

Member since: 10/08/2018

387 Reputation

3 Guides authored

Team

Cal Poly, Team S17-G5, White Fall 2018 Member of Cal Poly, Team S17-G5, White Fall 2018

CPSU-WHITE-F18S17G5

4 Members

11 Guides authored

One Comment

how i need to know how to re connect the wires on replacing a new motor, my model is similar HV321.

andrea - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 29

Past 30 Days: 103

All Time: 1,426