Introduction

Step by step guide on how to remove the filter if it needs to be replaced or cleaned. The filter can be easily accessed by using the release push button on the dust cup. Depending on how full the dust cup is, you should be prepared for dirt and debris to come loose upon removing the filter.

Separate the dust cup by pressing the grey push button on top of the vacuum and pulling it apart from the body. Separate the dust cup by pressing the grey push button on top of the vacuum and pulling it apart from the body. Separate the dust cup by pressing the grey push button on top of the vacuum and pulling it apart from the body.
  • Separate the dust cup by pressing the grey push button on top of the vacuum and pulling it apart from the body.

Add Comment

Black Friday
Broken doesn't stand a chance.
Pull the filter out of dust cup. Clean the filter using cool water and let it dry completely before inserting it back into the container.
  • Pull the filter out of dust cup.

  • Clean the filter using cool water and let it dry completely before inserting it back into the container.

  • Do not wash in a washing machine or use a hair-dryer or other forced air to dry. Air dry only.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Attached Documents

Tanner Brown

Member since: 06/27/2017

322 Reputation

3 Guides authored

Team

UW Tacoma, Team S1-G5, Liner Summer 2017 Member of UW Tacoma, Team S1-G5, Liner Summer 2017

UWT-LINER-SU17S1G5

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 21