Introduction

The speaker is a small, round piece that is easily detachable from the device. However, to access the speaker, various prerequisite steps must be completed.

Parts

No parts required.

Image 1/3: While holding down the button, pull cover off with other hand. Image 2/3: While holding down the button, pull cover off with other hand. Image 3/3: While holding down the button, pull cover off with other hand.
  • Place thumb on the tab located at the back of the phone and slide button towards your hand and away from phone.

  • While holding down the button, pull cover off with other hand.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Use fingers to grip the battery and remove it from the phone.

Add Comment

Image 1/1:
  • Using a spudger, remove the four rubber coverings on the lower back plate.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Using a Tri-wing Y0 screwdriver, remove the four 4.4mm screws securing the back plate.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Remove the lower back cover to reveal part of the motherboard and the circular speaker housed in the back cover plate.

Add Comment

Image 1/2: Image 2/2:
  • Gently tap the lower back casing on a hard surface to remove the speaker.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Preston

Member since: 03/11/2013

216 Reputation

5 Guides authored

Team

Clemson, Team 12-1, Benson Spring 2013 Member of Clemson, Team 12-1, Benson Spring 2013

CLEM-BENSON-S13S12G1

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 196