Introduction

This guide will show you how to remove the back wheels and axle of a Sanitaire SC684 Vacuum and replace them. For this you will need a replacement back wheel and axle part for a Sanitaire SC684. The wheels come attached with the axle and are removed and replaced together.

  1. Be sure to unplug the vacuum before disassembling to prevent electric shock.
    • Be sure to unplug the vacuum before disassembling to prevent electric shock.

    • Lay the vacuum on its side.

    • Remove the two screws with the Phillips #1 screwdriver that are securing the axel of the back wheels.

    • Repeat for the other wheel.

    Add Comment

  2. Pull the wheel's axel towards you and replace back wheels. The wheels come as a unit with the wheel's axel.
    • Pull the wheel's axel towards you and replace back wheels. The wheels come as a unit with the wheel's axel.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Caycie Pascual

Member since: 09/26/2012

1 Reputation

5 Guides authored

Team

Cal Poly, Team 16-58, Forte Fall 2012 Member of Cal Poly, Team 16-58, Forte Fall 2012

CPSU-FORTE-F12S16G58

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 6

All Time: 563