Danger
Potentially Dangerous
Injury may result if this procedure is not followed properly. Use caution and follow all warnings.
Danger

Introduction

This guide will give user step by step instructions on how to replace the flash capacitor of the camera.

The first thing to do will be unscrew all the screws using Phillips #000 Screwdriver. Keep all the screws in order. Black screws goes under the bottom of camera, and the silver screws goes on the sides and inside of the camera. Keep all the screws in order. Black screws goes under the bottom of camera, and the silver screws goes on the sides and inside of the camera.
  • The first thing to do will be unscrew all the screws using Phillips #000 Screwdriver.

  • Keep all the screws in order. Black screws goes under the bottom of camera, and the silver screws goes on the sides and inside of the camera.

Add Comment

Using the spudger, and plastic opening tool open the casing of camera. Using the spudger, and plastic opening tool open the casing of camera.
  • Using the spudger, and plastic opening tool open the casing of camera.

Add Comment

Once you open the camera case, you will be able to work on any part of the camera. Once you open the camera case, you will be able to work on any part of the camera. Once you open the camera case, you will be able to work on any part of the camera.
  • Once you open the camera case, you will be able to work on any part of the camera.

Add Comment

Carefully take out the internal battery using spudger. Capacitors can be very dangerous, so make sure to be careful!
  • Carefully take out the internal battery using spudger.

  • Capacitors can be very dangerous, so make sure to be careful!

Add Comment

Disconnect the wire from battery and replace the old battery with new battery.
  • Disconnect the wire from battery and replace the old battery with new battery.

  • Connect the wires to new battery and put the battery back in terminal.

  • Connect the positive wire to the positive terminal of the battery and negative wire to the the negative terminal of the battery.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sarmad Khan

Member since: 01/09/2015

501 Reputation

5 Guides authored

Team

USF Tampa, Team 1-6, Tanski Winter 2015 Member of USF Tampa, Team 1-6, Tanski Winter 2015

USFT-TANSKI-W15S1G6

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 4

Past 30 Days: 23

All Time: 633