Introduction

The battery should be replaced if it fails to hold a charge or appears to be corroded in any way.

Place the camera upside down on a hard surface such as a table. Make sure that the battery compartment is visible.
  • Place the camera upside down on a hard surface such as a table. Make sure that the battery compartment is visible.

Add Comment

Twist the nob counter-clockwise while pushing cover to the left. Then pull the cover up to reveal the battery.
  • Twist the nob counter-clockwise while pushing cover to the left. Then pull the cover up to reveal the battery.

Add Comment

Slide the blue tab to the right to release the battery.
  • Slide the blue tab to the right to release the battery.

Add Comment

Carefully slide the battery out of the camera. It can then be replaced with a new battery.
  • Carefully slide the battery out of the camera. It can then be replaced with a new battery.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

James Julian

Member since: 03/06/2016

201 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 79