Introduction

This guide can be used to replace any damaged back panels, access the screen, and other inner parts of the camera.

Parts

No parts required.

Use a Phillips head screwdriver to remove 5 screws from the camera.  There are 2 4mm screws on the left side, 2 2mm screws on the right side and 1 4mm screw on the bottom. Do not mix the 5 screws; they are different sizes. Do not mix the 5 screws; they are different sizes.
  • Use a Phillips head screwdriver to remove 5 screws from the camera. There are 2 4mm screws on the left side, 2 2mm screws on the right side and 1 4mm screw on the bottom.

  • Do not mix the 5 screws; they are different sizes.

Add Comment

Deck the Halls
With tools and Fix Kits
Use your fingers to pull the back cover off. Use your fingers to pull the back cover off.
  • Use your fingers to pull the back cover off.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Jessica Bain

Member since: 03/11/2015

393 Reputation

2 Guides authored

Team

Marist, Team 1-6, Laflen Spring 2015 Member of Marist, Team 1-6, Laflen Spring 2015

MARS-LAFLEN-S15S1G6

2 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 156