Parts

No parts required.

Remove these screws from the camera using a phillips head screwdriver. Remove these screws from the camera using a phillips head screwdriver. Remove these screws from the camera using a phillips head screwdriver.
  • Remove these screws from the camera using a phillips head screwdriver.

Add Comment

Lay the camera down on the table and remove the metal shell from the front.
  • Lay the camera down on the table and remove the metal shell from the front.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Wedge a spudger/flathead screwdriver inside of the shell where the screws were to pry the shell off of the back.
  • Wedge a spudger/flathead screwdriver inside of the shell where the screws were to pry the shell off of the back.

Add Comment

Remove the shell the from the back of the camera.
  • Remove the shell the from the back of the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicholas Pavao

Member since: 03/27/2015

397 Reputation

3 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 322