Fix Your Stuff Community Store

Samsung SC MX-20 Hand Strap Replacement

Introduction

When you use your camcorder to record video, you’ll find that the hand strap is one of the most useful components to stabilize your image/video. The hand strap in your device is likely to wear out and become unusable. If you’re looking to replace a worn out or damaged hand strap, follow the steps in this guide.

What you need

  1. Samsung SC MX-20 Hand Strap Replacement, Hand Strap: step 1, image 1 of 3 Samsung SC MX-20 Hand Strap Replacement, Hand Strap: step 1, image 2 of 3 Samsung SC MX-20 Hand Strap Replacement, Hand Strap: step 1, image 3 of 3

    • Remove all eight screws using the Phillips #000 screwdriver.

    Edit

  2. Samsung SC MX-20 Hand Strap Replacement: step 2, image 1 of 1

    • Pull apart the sides of the camera once the screws are removed.

    Edit

  4. Samsung SC MX-20 Hand Strap Replacement: step 3, image 1 of 1

    • Remove the three screws using the Phillips #000 screwdriver.

    Edit

  5. Samsung SC MX-20 Hand Strap Replacement: step 4, image 1 of 1

    • Remove the three screws using the Phillips #000 screwdriver.

    Edit

  6. Samsung SC MX-20 Hand Strap Replacement: step 5, image 1 of 1

    • Remove the four screws using a Phillips #000 screwdriver.

    Edit

  7. Samsung SC MX-20 Hand Strap Replacement: step 6, image 1 of 2 Samsung SC MX-20 Hand Strap Replacement: step 6, image 2 of 2

    • Remove the hand strap from the device.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 10

All Time: 178