Introduction

If your outside casing is damaged, you can remove it and replace it with a new one.

Parts

No parts required.

Image 1/3: Remove 2 screws from side of camera Image 2/3: Remove 2 screws from side of camera Image 3/3: Place Screws on magnetic surface or location where they will not roll away
  • Remove 4 screws from bottom of camera

  • Remove 2 screws from side of camera

  • Remove 2 screws from side of camera

    • Place Screws on magnetic surface or location where they will not roll away

Add Comment

Image 1/2: Image 2/2:
  • Squeeze area noted by blue square and pull outside shell apart from remaining camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 179