Introduction

How to remove the front and back cases of the device

Placing your thumb on the battery cover, push outwards, away from the camera in the direction the arrow is pointing. If done correctly when it's completely unhooked, the latch will open. Placing your thumb on the battery cover, push outwards, away from the camera in the direction the arrow is pointing. If done correctly when it's completely unhooked, the latch will open. Placing your thumb on the battery cover, push outwards, away from the camera in the direction the arrow is pointing. If done correctly when it's completely unhooked, the latch will open.
  • Placing your thumb on the battery cover, push outwards, away from the camera in the direction the arrow is pointing. If done correctly when it's completely unhooked, the latch will open.

Add Comment

Tip the camera as to gently slide the batteries out of the camera. Tip the camera as to gently slide the batteries out of the camera.
  • Tip the camera as to gently slide the batteries out of the camera.

Add Comment

Black Friday
Broken doesn't stand a chance.
All screws in this camera are removed using the Phillip Screwdriver #000 bit. Also, all dimensions included refer to screw lengths. Locate and remove the six 4mm screws on the sides of the camera. Locate and remove the six 4mm screws on the sides of the camera.
  • All screws in this camera are removed using the Phillip Screwdriver #000 bit. Also, all dimensions included refer to screw lengths.

  • Locate and remove the six 4mm screws on the sides of the camera.

Add Comment

Use the plastic opening tool to pry open the back case, following alongside the edge of the case if need be. Use the plastic opening tool to pry open the back case, following alongside the edge of the case if need be.
  • Use the plastic opening tool to pry open the back case, following alongside the edge of the case if need be.

Add Comment

Once the back case is removed, use the plastic opening tool to gently pry off the front case.
  • Once the back case is removed, use the plastic opening tool to gently pry off the front case.

Add Comment

Conclusion

This will be used as a prerequisite to other guides. To reassemble your device, follow these instructions in reverse order.

David Sepulveda

Member since: 03/06/2017

326 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 65