Introduction

Outline what you are going to teach someone how to do.

  1. When looking at the bot from above, find the handle that says pull, on the opposite side of the cylinder that says cyclone force.
    • When looking at the bot from above, find the handle that says pull, on the opposite side of the cylinder that says cyclone force.

  2. For stability, place one hand on the curved back edge of the bot, and place the other on this pull handle.
    • For stability, place one hand on the curved back edge of the bot, and place the other on this pull handle.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Pull the handle up and towards the back of the bot, so the dust bin begins to rotate.
    • Pull the handle up and towards the back of the bot, so the dust bin begins to rotate.

  5. Keep pulling until the dust pin fully releases itself from the bot.
    • Keep pulling until the dust pin fully releases itself from the bot.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Ethen Sanchez

Member since: 01/24/2017

528 Reputation

5 Guides authored

Team

Cal Poly, Team 10-3, Banghart Winter 2017 Member of Cal Poly, Team 10-3, Banghart Winter 2017

CPSU-BANGHART-W17S10G3

3 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 162