Samsung Powerbot R9250 Back Panel Replacement
Ethen Sanchez and 3 other contributors
Last updated on Jun 9, 2019
Views: 1.2K
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 20
- Past 30 Days:
- 74
- All Time:
- 1,169
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
What you need
Tools
-
-
-
Find the white outer casing that runs along the rounded back of the bot and pry it out starting from one edge and moving to the other.
-
Continue until the whole white case pops off.
Ask FixBot
-
-
-
On the edge where the back panel meets the protective casing on the side of the bot (below the Samsung logo), pry the panel up, causing it to pop up.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 10-3, Banghart Winter 2017 Member of Cal Poly, Team 10-3, Banghart Winter 2017
CPSU-BANGHART-W17S10G3
3 Members
60 Guides authored
