Introduction
Replace a broken, cracked or frozen screen on your Samsung PL200 digital camera. Tools are required to access interior camera components.
What you need
-
-
Remove the six 3 mm external screws from the camera base using the Phillips #000 screwdriver.
Ask FixBot
-
-
-
Use the plastic opening tools and your fingers to pull the external cover off.
-
-
-
Tool used on this step:Tweezers$4.99
-
Remove the 3 mm screw holding the circuit board.
-
Use a pair of tweezers to detach the two ribbon cables connecting the circuit board to the camera.
-
Remove the circuit board.
-
-
-
Flip the LCD screen forward and remove the two 3 mm screws holding the metal midframe using a Phillips #000 screwdriver.
-
Remove the midframe using an opening tool.
-
-
-
Lift the black strip and the ribbon will easily come out.
-
After doing this, the LCD screen will be separated from the camera.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Clemson, Team 15-7, Shirley Winter 2015 Member of Clemson, Team 15-7, Shirley Winter 2015
CLEM-SHIRLEY-W15S15G7
5 Members
10 Guides authored
