Introduction

If you need to replacement your front lens, here is the guide to do so. Be sure to turn off your camera and take out the battery before you being your replacement.

  1. Unscrew the four 5.5 mm #000 Philips screws that are on the metal ring with a Philips #000 screwdriver. Unscrew the four 5.5 mm #000 Philips screws that are on the metal ring with a Philips #000 screwdriver.
    • Unscrew the four 5.5 mm #000 Philips screws that are on the metal ring with a Philips #000 screwdriver.

  2. Remove the metal ring using the plastic opening tool. Remove the metal ring using the plastic opening tool.
    • Remove the metal ring using the plastic opening tool.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Remove the black plastic ring using the plastic opening tool. Remove the black plastic ring using the plastic opening tool.
    • Remove the black plastic ring using the plastic opening tool.

  5. Remove the thin metal ring. Remove the thin metal ring.
    • Remove the thin metal ring.

  6. Remove the three 4.5 mm Phillips #000 head screws located inside the cover with a Phillips #000 screwdriver.
    • Remove the three 4.5 mm Phillips #000 head screws located inside the cover with a Phillips #000 screwdriver.

  7. There are a few loose metal parts and springs. Be careful not to shake the device. Remove the white plastic ring.
    • There are a few loose metal parts and springs. Be careful not to shake the device.

    • Remove the white plastic ring.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Yesenia

Member since: 01/22/2015

717 Reputation

6 Guides authored

Team

Cal Poly, Team 20-13, Maness Winter 2015 Member of Cal Poly, Team 20-13, Maness Winter 2015

CPSU-MANESS-W15S20G13

4 Members

7 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 16

All Time: 1,143