Parts

No parts required.

  1. Power off laptop before starting.
    • Power off laptop before starting.

    • Find the back plate cover labeled HDD.

  2. Remove both of the 5 mm Phillips head screws on the HDD back plate cover. Remove both of the 5 mm Phillips head screws on the HDD back plate cover.
    • Remove both of the 5 mm Phillips head screws on the HDD back plate cover.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Pull down while applying pressure to release HDD back plate cover and then lift the cover upward. Pull down while applying pressure to release HDD back plate cover and then lift the cover upward. Pull down while applying pressure to release HDD back plate cover and then lift the cover upward.
    • Pull down while applying pressure to release HDD back plate cover and then lift the cover upward.

  5. Find the black plastic tab on the hard drive.
    • Find the black plastic tab on the hard drive.

  6. Grasp the tab and pull it to the left until the hard drive releases its connection and is able to be lifted free. Grasp the tab and pull it to the left until the hard drive releases its connection and is able to be lifted free.
    • Grasp the tab and pull it to the left until the hard drive releases its connection and is able to be lifted free.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Brian Adamson

Member since: 10/10/2016

450 Reputation

3 Guides authored

Team

Texas Tech, Team 6-2, Bennett Fall 2016 Member of Texas Tech, Team 6-2, Bennett Fall 2016

TTU-BENNETT-F16S6G2

4 Members

3 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 20

All Time: 649