Introduction

This guide with show you how to remove the rear case of your phone in order to reach the motherboard.

  1. Slide your fingernail into the slit at the bottom of the phone to remove the back cover.
    • Slide your fingernail into the slit at the bottom of the phone to remove the back cover.

    Add Comment

  2. Place your finger in either of the bottom corner of the battery slot and lift to remove the battery.
    • Place your finger in either of the bottom corner of the battery slot and lift to remove the battery.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove six 5 mm Phillips #0 screws from the back of the phone.

    Add Comment

    • Insert a plastic opening tool into the seam between the back case and the rest of the phone.

    • Working along the seam, pry the back from the phone.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Morgan Yost

Member since: 04/08/2013

46 Reputation

6 Guides authored

Team

Cal Poly, Team 17-1, Regan Spring 2013 Member of Cal Poly, Team 17-1, Regan Spring 2013

CPSU-REGAN-S13S17G1

4 Members

18 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 197