Parts

No parts required.

Remove batteries before you disassemble the remote Use a case opening tool to gently split the upper and lower case Work around the entire case until the 2 halves come apart completely
  • Remove batteries before you disassemble the remote

  • Use a case opening tool to gently split the upper and lower case

  • Work around the entire case until the 2 halves come apart completely

Add Comment

Release the circuit board by gently pushing the plastic tab away from the board Use minimal force to avoid breaking it
  • Release the circuit board by gently pushing the plastic tab away from the board

  • Use minimal force to avoid breaking it

  • Lift circuit board off top cover to expose the rubber button membrane

  • Lift off the rubber button membrane

Add Comment

Deck the Halls
With tools and Fix Kits
During reassembly make sure that you correctly place the battery cover retainer on the read case During reassembly make sure that you correctly place the battery cover retainer on the read case
  • During reassembly make sure that you correctly place the battery cover retainer on the read case

Add Comment

When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover
  • When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

Richdave

Member since: 04/09/2010

26,128 Reputation

31 Guides authored

Team

Master Techs Member of Master Techs

Community

268 Members

644 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 8

Past 7 Days: 87

Past 30 Days: 409

All Time: 18,753