Introduction

How-to-guide for replacing the Samsung Juke SCH-u470 camera/speaker.

Locate the button on the bottom of the phone. Once located, press and hold the button down.
  • Locate the button on the bottom of the phone. Once located, press and hold the button down.

Add Comment

While holding the button down, remove the back cover of the phone. While holding the button down, remove the back cover of the phone.
  • While holding the button down, remove the back cover of the phone.

Add Comment

Use the size 00 Phillips screwdriver to remove the four screws located on the back of the phone. These screws are circled in yellow in the given image.
  • Use the size 00 Phillips screwdriver to remove the four screws located on the back of the phone. These screws are circled in yellow in the given image.

Add Comment

Deck the Halls
With tools and Fix Kits
Using the same 00 Phillips screwdriver, remove the two screws at the bottom back plate of the phone near the camera and the speaker.
  • Using the same 00 Phillips screwdriver, remove the two screws at the bottom back plate of the phone near the camera and the speaker.

  • These screws will be 7.25 mm long.

Add Comment

Before proceeding, locate the USB port (where the charger can be plugged in) and open it using the iFixit Opening Tool. Failure to open USB port cover at this stage may result in damaging the device. Failure to open USB port cover at this stage may result in damaging the device.
  • Before proceeding, locate the USB port (where the charger can be plugged in) and open it using the iFixit Opening Tool.

  • Failure to open USB port cover at this stage may result in damaging the device.

Add Comment

Remove the screws on either side of the camera/speaker with a Phillips 00 screwdriver.
  • Remove the screws on either side of the camera/speaker with a Phillips 00 screwdriver.

  • These screws will be 5.45 mm long.

Add Comment

Use the iFixit Opening Tool to begin removing the camera/speaker from the logic board. Practice caution to prevent damage to the attaching ribbon.
  • Use the iFixit Opening Tool to begin removing the camera/speaker from the logic board.

  • Practice caution to prevent damage to the attaching ribbon.

Add Comment

To completely remove the camera/speaker, locate the orange attachment beneath it (as shown in the image). Then, use the iFixit Opening Tool to gently pry the camera/speaker off.
  • To completely remove the camera/speaker, locate the orange attachment beneath it (as shown in the image).

  • Then, use the iFixit Opening Tool to gently pry the camera/speaker off.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Renee Kuzniar

Member since: 04/13/2010

82 Reputation

4 Guides authored

Team

Cal Poly, Team 6-18, Maness Spring 2010 Member of Cal Poly, Team 6-18, Maness Spring 2010

CPSU-MANESS-S10S6G18

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 3,292