What you need
-
-
I recommend wearing eye protection to avoid getting glass shards in the eyes. It is very important to heat the edges of the display well with a hair dryer/heat gun to loosen the double-sided adhesive and allow the insertion of a pry tool to open it.
-
Insert the pry tool between the colored plastic edge and the glass (not between the plastic and aluminum edge) and begin to separate the display from the body.
-
-
To reassemble the device, follow these instructions in reverse order.
To reassemble the device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
14 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›