Parts

No parts required.

Introduction

How to remove & replace the phone's back cover.

Image 1/1: Using your thumb, slide the back panel away from the camera to expose the battery.
  • Orient the phone with the screen facing down.

  • Using your thumb, slide the back panel away from the camera to expose the battery.

Add Comment

Image 1/2: Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free. Image 2/2: Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free.
  • Grip the battery on its sides, opposite the direction of the white arrow.

  • Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free.

Add Comment

Image 1/1: The screws should be 3.5 mm in length.
  • Remove the 6 outer screws.

    • The screws should be 3.5 mm in length.

  • Put the screws in a safe place as they are very small and easy to lose.

Add Comment

Image 1/1: It may help to slide the touchscreen upwards when removing the back panel.
  • Snap off back the cover by gently prying around the top and bottom edges with a flat head screwdriver.

    • It may help to slide the touchscreen upwards when removing the back panel.

  • The side buttons will become loose and are prone to fall out, so put these in a safe place.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Saul Villatoro

Member since: 04/25/2011

255 Reputation

7 Guides authored

Team

Cal Poly, Team 8-10, Regan Spring 2011 Member of Cal Poly, Team 8-10, Regan Spring 2011

CPSU-REGAN-S11S8G10

4 Members

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,537