Introduction

If the glass on the screen of your Samsung Galaxy Tab A 9.7 is cracked or damaged in any way, your device could be nearly unusable. This guide will help you replace the display glass in an easy and safe way.

Microwave the iOpener for 30 seconds.
  • Microwave the iOpener for 30 seconds.

  • Place the iOpener on each side of the screen for 30 seconds.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Take a metal spudger and wedge it between the screen and the glass.
  • Take a metal spudger and wedge it between the screen and the glass.

  • Avoiding the screen itself, run the spudger along the perimeter of the device to weaken the glue between the glass and screen, and pry the glass off.

Add Comment

Using a suction cup, gently remove the screen from the device.
  • Using a suction cup, gently remove the screen from the device.

  • When placing a new screen on the device, remember that you will have to reapply adhesive to the outside of the screen.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Paulina Nguyen

Member since: 04/26/2017

674 Reputation

6 Guides authored

Team

Cal Poly, Team S1-G3, Livingston Spring 2017 Member of Cal Poly, Team S1-G3, Livingston Spring 2017

CPSU-LIVINGSTON-S17S1G3

1 Member

6 Guides authored

3 Comments

This is not entirely correct. For the proper way to replaced this glass, you need to remove the back cover as well, in order to connect the digitizer flex cable to the board.

Hank - Reply

incomplete.

Niah Mason - Reply

Not a good tutorial.

Easy Repair - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 18

Past 30 Days: 97

All Time: 1,941