Introduction

Volume and lock buttons are crucial to facilitate the use and safety of any device. Replacing these components are a breeze. For this guide, all you need are these easy steps and a few tools to facilitate the process.

Tools

No tools required.

Parts

No parts required.

Image 1/3: At the top of the tablet, nudge the blue plastic opening tool between the back plastic casing and the front panel's metal rim. Image 2/3: Do not use excessive force when prying the clips, fastening the casing together, open because they can easily break. Image 3/3: Do not use excessive force when prying the clips, fastening the casing together, open because they can easily break.
  • Before disassembling your Samsung Galaxy Tab 4 8.0, be sure it is powered off.

  • At the top of the tablet, nudge the blue plastic opening tool between the back plastic casing and the front panel's metal rim.

  • Do not use excessive force when prying the clips, fastening the casing together, open because they can easily break.

How do u find the tool to open it

Gm - Reply

u can go and search on trade me

armaan devgun -

NOTE: Make sure to remove both the SIM card and the Micro SD card prior to disassembly. Failure to do so could result in broken parts.

Cameron - Reply

Image 1/2: As right-handers, we found it easiest to move clockwise and use more pressure around the corners to facilitate the process. Image 2/2: You might hear several popping noises caused by the plastic clips coming undone.
  • Continue prying the blue plastic opening tool along the perimeter of the tablet to separate the back plastic casing from the front assembly panel.

  • As right-handers, we found it easiest to move clockwise and use more pressure around the corners to facilitate the process.

  • You might hear several popping noises caused by the plastic clips coming undone.

Xcsdddssdf(k

Dragon Slayer - Reply

Image 1/2: Firmly grasp the back plastic casing and lift it away from the front assembly panel. Image 2/2: Firmly grasp the back plastic casing and lift it away from the front assembly panel.
  • To avoid damaging the screen, gently set the tablet with the LCD screen faced down.

  • Firmly grasp the back plastic casing and lift it away from the front assembly panel.

Add Comment

Image 1/3: Using the spudger, first push the power/lock button then the volume button inwards from the opening towards the center of the tablet. Image 2/3: Using the spudger, first push the power/lock button then the volume button inwards from the opening towards the center of the tablet. Image 3/3: Using the spudger, first push the power/lock button then the volume button inwards from the opening towards the center of the tablet.
  • The button will be attached to the back casing of the tablet.

  • Using the spudger, first push the power/lock button then the volume button inwards from the opening towards the center of the tablet.

Add Comment

Image 1/1:
  • Using a precision tweezer, detach the clear plastic wire from the back casing by pulling the wire out of its slot.

Add Comment

Image 1/1:
  • Grab the power/volume button with a precision tweezer to completely lift the buttons out of the back casing.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Ofelia Cruz

Member since: 09/14/2015

786 Reputation

5 Guides authored

Team

CSU Fullerton, Team 1-3, Bruce Fall 2015 Member of CSU Fullerton, Team 1-3, Bruce Fall 2015

CSUF-BRUCE-F15S1G3

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 23

All Time: 790