Samsung Galaxy Tab 3 8.0 Display Assembly - Touch screen & LCD Display Replacement

Step 1 Display Assembly - Touch screen & LCD Display




• Put the scotch tape in order not to scatter pieces of glass.
• Remove any memory card and SIM card (if the tablet is 3G version).
Step 2 Battery / Back Cover




• Using plastic tools remove the back / battery cover.
• Be careful with the Power and Volume buttons.
Step 3
• Before doing anything, disconnect the battery.
Step 4 Micro USB Charging Port / Dock with Flex Cable
• This step is only if you want to replace the micro USB port flex cable.
• Remove the two screws and disconnect the charging port flex cable from the main board.
• Use a plastic tool to unstick the flex cable from the middle frame.
Step 5 Battery
• This step is for only if you want to change the battery.
• The battery is stuck to the middle panel.
• Use the white sticker to remove it.
Step 6 Components 1
• 2x loudspeackers
• Power & Volume buttons flex cable
• Audio jack flex cable
Step 7 Components 2
• Front camera
• Wi-Fi antenna
Step 8
• Use a heat gun or hair dryer and warm the touch screen glass. This will make the adhesive more flexible and the separation easier.
• Use a gloves to avoid any injurys from glass.
• Do not rush.
Step 9
• Beware for the menu buttons flex cable.
Step 10
• Always test the new spare part before final installation.
Step 11
• Transfer the black tape from the old display. It keeps the distance the display from the battery and protects it from overheat.
• If the adhesive tape is not in good condition you must install a new one.
Step 12
• Start with reassembling.
• .
• .
• .
• .
• .
• .
• Did you do it successfully.

Author

with 3 other contributors

ZFix

Member since: 12/09/13

191,278 Reputation

330 Guides authored

Badges: 35

• 
• 
• 

+32 more badges

Team

Master Techs Member of Master Techs

Community

322 Members

2,532 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview