Introduction

If your tablet has a broken touch screen glass (digitizer), LCD display or you want to chang the micro USB charging port, loudspeakers, audio jack connector, etc., with this guide we will help you to do it.


Video Overview

Put the scotch tape in order not to scatter pieces of glass. Remove any memory card and SIM card (if the tablet is 3G version). Remove any memory card and SIM card (if the tablet is 3G version).
  • Put the scotch tape in order not to scatter pieces of glass.

  • Remove any memory card and SIM card (if the tablet is 3G version).

Add Comment

Using plastic tools remove the back / battery cover. Be careful with the Power and Volume buttons. Be careful with the Power and Volume buttons.
  • Using plastic tools remove the back / battery cover.

  • Be careful with the Power and Volume buttons.

Add Comment

Before doing anything, disconnect the battery.
  • Before doing anything, disconnect the battery.

Add Comment

This step is only if you want to replace the micro USB port flex cable. Remove the two screws and disconnect the charging port flex cable from the main board. Use a plastic tool to unstick the flex cable from the middle frame.
  • This step is only if you want to replace the micro USB port flex cable.

  • Remove the two screws and disconnect the charging port flex cable from the main board.

  • Use a plastic tool to unstick the flex cable from the middle frame.

Add Comment

This step is for only if you want to change the battery. The battery is stuck to the middle panel. Use the white sticker to remove it.
  • This step is for only if you want to change the battery.

  • The battery is stuck to the middle panel.

  • Use the white sticker to remove it.

Add Comment

2x loudspeackers Power & Volume buttons flex cable Audio jack flex cable
  • 2x loudspeackers

  • Power & Volume buttons flex cable

  • Audio jack flex cable

Add Comment

Front camera Wi-Fi antenna
  • Front camera

  • Wi-Fi antenna

Add Comment

Use a heat gun or hair dryer and warm the touch screen glass. This will make the adhesive more flexible and the separation easier. Use a gloves to avoid any injurys from glass. Do not rush.
  • Use a heat gun or hair dryer and warm the touch screen glass. This will make the adhesive more flexible and the separation easier.

  • Use a gloves to avoid any injurys from glass.

  • Do not rush.

Add Comment

Beware for the menu buttons flex cable. Beware for the menu buttons flex cable. Beware for the menu buttons flex cable.
  • Beware for the menu buttons flex cable.

Add Comment

Always test the new spare part before final installation. Always test the new spare part before final installation.
  • Always test the new spare part before final installation.

Add Comment

Transfer the black tape from the old display. It keeps the distance the display from the battery and protects it from overheat. If the adhesive tape is not in good condition you must install a new one. If the adhesive tape is not in good condition you must install a new one.
  • Transfer the black tape from the old display. It keeps the distance the display from the battery and protects it from overheat.

  • If the adhesive tape is not in good condition you must install a new one.

Add Comment

Start with reassembling. .
  • Start with reassembling.

  • .

  • .

  • .

  • .

  • .

  • .

  • Did you do it successfully.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

12 other people completed this guide.

ZFix

Member since: 12/09/2013

133,851 Reputation

389 Guides authored

Team

Master Techs Member of Master Techs

Community

267 Members

638 Guides authored

One Comment

Awesome guide, was so easy to replace complete LCD digitiser and glass all in one unit.

capinneemo - Reply

Add Comment

View Statistics:

Past 24 Hours: 19

Past 7 Days: 85

Past 30 Days: 455

All Time: 13,896