Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

Samsung Galaxy Star Pro Screen Replacement

Views: 2.4K

View statistics:

Past 24 Hours:
4
Past 7 Days:
22
Past 30 Days:
87
All Time:
2,402
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 7

7 people have marked this guide "completed." Will you be next?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 10 minutes
Difficulty: Moderate
Samsung Galaxy Star Pro  Screen Replacement

Introduction

Go to step 1 ↓

How to replace their screen on their own in a simple and straight forward manor. Screens can break from physical damage or the screen becomes nonfunctional from everyday ware. The screen is one of the most vital pieces of the phone. Screen replacement can be a hassle and expensive this guide will save you money and time.

What you need

Tools

    1. Samsung Galaxy Star Pro  Screen Replacement, Battery Replacement: step 1, image 1 of 1
      • Place phone firmly between both hands with one hand flat on the back of the phone and pop off the back cover

      Ask FixBot

      Add Comment

    2. Samsung Galaxy Star Pro  Screen Replacement: step 2, image 1 of 2 Samsung Galaxy Star Pro  Screen Replacement: step 2, image 2 of 2
      • Once rear cover is off use small pastic spudger to lift battery out of the phone

      Ask FixBot

      Add Comment

    1. Samsung Galaxy Star Pro  Screen Replacement, Screen: step 3, image 1 of 1
      • After following how to remove the battery, unscrew the five 1.2mm Phillips Screws on the one back of the phone using screw driver. Use the J00 Phillips head screw bit to take out the screws

      Ask FixBot

      Add Comment

    2. Samsung Galaxy Star Pro  Screen Replacement: step 4, image 1 of 1
      • Once screws are removed turn the phone over and use the plastic opening tool and unclip the connector holding the screen to the motherboard.

      • Be careful to not damage the press-fit connector that connects the screen to the motherboard.

      Ask FixBot

      Add Comment

    3. Samsung Galaxy Star Pro  Screen Replacement: step 5, image 1 of 1
      • Us the plastic opening tool to pry apart the screen from the plastic. Start from one side and work your way around the whole phone.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

7 other people completed this guide.

Author

with

Victor bader

Member since: 03/09/16

496 Reputation

2 Guides authored

Team

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 22

Past 30 Days: 87

All Time: 2,402