Skip to main content
  1. First get a heat gun or a hairdryer.
    • First get a heat gun or a hairdryer.

    • Heat up each side for about two minutes.

    • Once the adhesive has melted, stick in a pry tool and try to remove as much adhesive as possible, then use a suction cup to pry up on the back glass.

    • Carefully apply the new adhesive onto the phone.

    • Carefully place the new back glass onto the newly installed adhesive.

    • Let it dry before peeling off the protective seal.

Conclusion

How to fix your device followed the steps shown.

One other person completed this guide.

Andrew

Member since: 02/16/2022

109 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 35

Past 30 Days: 135

All Time: 576