Samsung Epic 4G Touch Battery Replacement

Replace the Battery in your Samsung Epic 4G Touch.

Use this guide to replace the battery.

Edit Step 1 Rear Case  ¶ 

Image 1/2: Pry the opening tool downward to pop the rear case from its clips securing it to the the midframe.

Edit Step 1 Rear Case  ¶ 

  • Insert a plastic opening tool, or your fingernail, into the opening near the left side of the headphone jack.

  • Pry the opening tool downward to pop the rear case from its clips securing it to the the midframe.

Edit Step 2  ¶ 

Image 1/2:

Edit Step 2  ¶ 

  • Lift and remove the rear case.

Edit Step 3 Battery  ¶ 

Image 1/2: Push the plastic opening tool downward to pry the battery up from its housing.

Edit Step 3 Battery  ¶ 

  • Wedge a plastic opening tool into the crevice between the battery and midframe located near the bottom left corner.

  • Push the plastic opening tool downward to pry the battery up from its housing.

Edit Step 4  ¶ 

Image 1/2:

Edit Step 4  ¶ 

  • Lift and remove the battery from the midframe.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Now that you've finished, share your repair story with others.

Write a story

2 Comments

Add a comment

i just reacently got my phone and I don't know whats happening to it. it keeps turning itself off. iv factory reset it 2 times. should I replace the phone or just the battery. I have a Samsung galaxy s II. (sprint)

gamerzzz - Reply

I have an samsung galaxy s2 gsm unlocked and my battery wont stay charge and sometimes when its plugged in a charger it decreases instead of increasing and if it does charges it decrease fast what shall i do shall i get a new battery or replace the phone

ianasims - Reply