Introduction
The display is a 5 inch in size and with a resolution of 720x1280 pixels. And it is a touchscreen.
What you need
-
-
-
Use a plastic pry tool to lift the front-facing camera from its housing.
-
-
-
Using a Phillips #00 screwdriver, remove the screw securing the rear-facing camera.
-
-
-
Take a plastic stick to insert into the headphone jack to lift part of the housing.
-
Once that's complete place the part aside.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.