Skip to main content

Introduction

This guide is for replacing the screen of a Samsung Galaxy Luna.

Parts

No parts specified.

  1. Place small suction cup on the center of screen and press firmly. Hold the back of the phone and pull on the suction cup gently until the screen begins to bend. Hold the back of the phone and pull on the suction cup gently until the screen begins to bend.
    • Place small suction cup on the center of screen and press firmly.

    • Hold the back of the phone and pull on the suction cup gently until the screen begins to bend.

  2. Insert the small metal spudger into an opening on the phone and pry off the screen.
    • Insert the small metal spudger into an opening on the phone and pry off the screen.

    • Be careful not to tear any exposed circuits as the screen is being removed.

    • Make sure the screen is completely detached from the motherboard before removing it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Daniel Rocchi

Member since: 02/14/2018

199 Reputation

2 Guides authored

Team

USF Tampa, Team S6-G1, Eyestone Spring 2018 Member of USF Tampa, Team S6-G1, Eyestone Spring 2018

USFT-EYESTONE-S18S6G1

4 Members

5 Guides authored

2 Comments

yeah, i tried it. It ended up just cracking the screen a lot. It also never worked for me.

KEAHI BAILEY - Reply

I don't have a handle for the suction. But I don't have a metal spudger set either, is there anything else that I can use in place of the metal spudger?

bikergirl1993 - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 20

All Time: 580