Introduction

The plastic covering over the camera can sometimes crack or break off completely. This guide will show you how to replace the middle frame bezel including the camera cover.

  1. Separate the back casing from the phone by carefully using your fingers to pry it apart.
    • Separate the back casing from the phone by carefully using your fingers to pry it apart.

  2. Remove all 11 screws by using the J000 phillips head from the 64 Bit Driver Kit.
    • Remove all 11 screws by using the J000 phillips head from the 64 Bit Driver Kit.

    • Remove the battery by gripping on and pulling up.

    • Use the flat side of the metal spudger to remove the middle frame bezel, and replace.

    • Do not use a wrenching motion while performing this step. The screen may crack.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

0 Comments

View Statistics:

Past 24 Hours: 3

Past 7 Days: 10

Past 30 Days: 59

All Time: 1,305