Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

Have you ever dropped your phone and sighed with relief because the screen didn't hit the ground. You happily pick up your phone only to then be saddened by the fact that your camera lens is now shattered. Well this guide will show you the step by step process of how to replace the camera on the Samsung Galaxy J3 Luna Pro.

  1. Turn off the phone.
    • Turn off the phone.

    • Remove the back cover and battery

  2. Attach a suction cup to the screen and pry upwards. Insert the plastic opening tool into the gap under the screen and work your way around the perimeter. Don't remove the screen completely as there are cables still connection the two pieces.
    • Attach a suction cup to the screen and pry upwards.

    • Insert the plastic opening tool into the gap under the screen and work your way around the perimeter.

    • Don't remove the screen completely as there are cables still connection the two pieces.

  3. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  4. Use the pointy end of a spudger to remove the white plastic cover from the display cover. Use the spudger to pry up the display cable from the motherboard. Remove the screen.
    • Use the pointy end of a spudger to remove the white plastic cover from the display cover.

    • Use the spudger to pry up the display cable from the motherboard.

    • Remove the screen.

  5. Remove the eleven JIS 00 screws from the mid-frame. Using a spudger, pry the mid-frame from the screen. Using a spudger, pry the mid-frame from the screen.
    • Remove the eleven JIS 00 screws from the mid-frame.

    • Using a spudger, pry the mid-frame from the screen.

  6. Remove the motherboard from the mid-frame. Remove the motherboard from the mid-frame. Remove the motherboard from the mid-frame.
    • Remove the motherboard from the mid-frame.

  7. Use a spudger to flip up the retaining flaps on the front and rear camera ribbon cable ZIF sockets. Pull the cables outs of the ZIF sockets. Pull the cables outs of the ZIF sockets.
    • Use a spudger to flip up the retaining flaps on the front and rear camera ribbon cable ZIF sockets.

    • Pull the cables outs of the ZIF sockets.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Jay Patel

Member since: 01/29/2018

150 Reputation

1 Guide authored

Team

USF Tampa, Team S5-G5, Passmore Spring 2018 Member of USF Tampa, Team S5-G5, Passmore Spring 2018

USFT-PASSMORE-S18S5G5

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 12

All Time: 990