Introduction

Sometimes the headphone jack can get extremely dirty or get something lodged in it. This guide will show you how to remove and replace the headphone jack.

  1. Separate the back casing from the phone by carefully using your fingers to pry it apart.
    • Separate the back casing from the phone by carefully using your fingers to pry it apart.

    Add Comment

  2. Remove all 11 screws by using  the J000 phillips
    • Remove all 11 screws by using the J000 phillips

    i can only see 10 screws, where is the 11th?

    George Panagiotakopoulos - Reply

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the battery by gripping on and pulling up.

    Add Comment

    • Use the flat side of the metal spudger to remove the middle frame bezel.

    • Do not use a wrenching motion while performing this step. The screen may crack.

    Add Comment

    • Detach the headphone jack from the motherboard plug-in.

    • Replace the headphone jack.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse.

7 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 8

Past 7 Days: 44

Past 30 Days: 177

All Time: 2,276