Introduction

This guide is a continuation of the band replacement guide. It is for showing how to replace the camera.

Image 1/1:
  • Loosen the camera ribbon so it will easily pass through the watch body.

Add Comment

Image 1/2: Do the same with the adjacent band, but there will be no camera ribbon to pass through the watch body. Image 2/2: Do the same with the adjacent band, but there will be no camera ribbon to pass through the watch body.
  • Grip the body of the watch and pull the band upward.

  • Do the same with the adjacent band, but there will be no camera ribbon to pass through the watch body.

Add Comment

Image 1/2: Use the plastic opening tool to pry the tab and pull the camera. Image 2/2: Use the plastic opening tool to pry the tab and pull the camera.
  • Use the plastic opening tool to pry the camera backdoor.

  • Use the plastic opening tool to pry the tab and pull the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Jenny Verheul

Member since: 04/28/2016

173 Reputation

1 Guide authored

Team

Cal Poly, Team 1-9, Maness Spring 2016 Member of Cal Poly, Team 1-9, Maness Spring 2016

CPSU-MANESS-S16S1G9

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 18

Past 30 Days: 54

All Time: 678