What you need
Video Overview
-
-
Turn off the device by pressing and holding the small button on the right side. After a few seconds, press the Power Off button and wait until the device has completely shut off
-
To soften the adhesive, use a heat gun or heating pad to warm up the device.
-
Use a Spudger (Or playing card) , Suction Cup, and Isopropyl alcohol to separate the back cover.
-
-
-
-
Remove the SIM tray.
-
Remove the plastic cover that covers the Fingerprint flex connector.
-
Disconnect the Fingerprint Sensor.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
