Introduction

Follow these easy steps to replace your old waste toner container. When waste toner container needs to be replaced a smart panel program window should appear on your computer.

Turn the printer off and wait a few minutes for it to cool.
  • Turn the printer off and wait a few minutes for it to cool.

Add Comment

Open the front cover. Open the front cover.
  • Open the front cover.

Add Comment

Deck the Halls
With tools and Fix Kits
Pull the waste toner container out of the printer using the handle.
  • Pull the waste toner container out of the printer using the handle.

  • Make sure to keep waste toner container upright to avoid spillage.

Add Comment

Use the provided green cap to close the waste container opening on the top back of the container.
  • Use the provided green cap to close the waste container opening on the top back of the container.

  • Push new container firmly into place.

  • Firmly close front cover.

  • Turn printer on.

  • It may take up to 3 minutes for printer to resume function.

  • If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Heather Howard

Member since: 10/15/2014

439 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 35

Past 30 Days: 146

All Time: 2,563