Introduction

We will teach the reader how to replace the media controls in the Samsung BD-H5100 in the case the controls don't work anymore when pressed.

Image 1/1:
  • Use the Phillips Head #2 screwdriver to remove the three 10mm screws on the back panel.

Add Comment

Image 1/3: Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel. Image 2/3: Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel. Image 3/3: Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel.
  • Use the plastic spudger to pry open the top panel from the center tab.

    • Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel.

Add Comment

Image 1/2: Image 2/2:
  • Pull the ribbon gently from one corner by the blue tab to remove it.

Add Comment

Image 1/1:
  • Use a Phillips Head #00 to unscrew the two 7mm screws on the media controls.

Add Comment

Image 1/1:
  • Remove the white cover from the media controls.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mira Patel

Member since: 10/11/2016

562 Reputation

5 Guides authored

Team

USF Tampa, Team 1-2, Leahy Fall 2016 Member of USF Tampa, Team 1-2, Leahy Fall 2016

USFT-LEAHY-F16S1G2

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 48