Parts

No parts required.

Introduction

This computer is equipped with a 1 TB hard drive. Whether the hard drive has went bad and needs replacement or if you want to upgrade to a larger and quicker one, this guide will help you complete this task.

Image 1/1: Remove one 6.5mm screw on exterior of computer.
  • Place the computer upside down.

  • Remove one 6.5mm screw on exterior of computer.

Add Comment

Image 1/2: Image 2/2:
  • Remove the panel by sliding it down and lifting it away from the computer, exposing the RAM and hard drive.

Add Comment

Image 1/2: Remove the harness from hard drive. Image 2/2: Remove and replace the hard drive.
  • Remove the four 4.4mm screws securing the hard drive.

  • Remove the harness from hard drive.

  • Remove and replace the hard drive.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Chad

Member since: 03/17/2015

332 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 4

Past 30 Days: 50

All Time: 1,495